ST Suspension ST XTA PLUS 3

For more information on the products available for your car, for detailed quotes and orders:

tel/Whatsapp: +39 331 9622326

Mail: info@gardustech.com

ST Suspension ST XTA PLUS 3 coilovers.

These coilovers are ideal for trackday and mountain driving enthusiasts and for those who are able to fine-tune the car's set-up.

The height of the ST XTA PLUS 3 is adjustable through rings from -10mm up to -85mm compared to the original shock absorbers (depending on the car) and this gives the vehicle on which they are installed a sportier look.

The internal hydraulics are adjustable in high and low compression on 16 clicks each while the rebound is adjustable on 24 clicks. The hydraulics can be adjusted using easily accessible knobs and this makes it possible to set the rigidity and response of the set-up based on the type of use of the car or the road to be travelled.

The springs are linear and are stiffer than the original shock absorbers. Depending on the car, the spring may have a Helper spring.

The camber is adjustable via Topmount on uniball to improve the tire's footprint when cornering.

Despite being a set-up suitable for sporty driving, the refinement of the hydraulics still allows you not to sacrifice too much comfort on the road.

The shock body is made from galvanized steel to prevent corrosion and the internal hydraulics are made by KW suspension and are the same as found in KW coilovers.

The spring plate is made of polyamide with a stainless steel core. The spring plate acts on an external thread of the shock absorber body.

Standard yellow spring. OPTIONAL springs in 17 other RAL colors are available.

Made in Germany.