ST Suspension ST XA

For more information on the products available for your car, for detailed quotes and orders:

tel/Whatsapp: +39 331 9622326

Mail: info@gardustech.com

ST Suspension ST XA coilovers.

These coilovers are an excellent compromise between sportiness, simplicity of adjustment and comfort on the road.

The height of the ST XA is adjustable through rings from -10mm up to -85mm compared to the original shock absorbers (depending on the car) and this gives the vehicle on which they are installed a sportier look.

The internal hydraulics are adjustable in compression and rebound using a knob that acts on both. There are 16 adjustment clicks available and this allows you to set the stiffness of the set-up based on the use of the car or the road you have to travel.

The springs are slightly stiffer than the original shock absorbers. Depending on the car, the spring may have a Helper spring.

Despite being a coilover suitable for sporty driving, the refinement of the hydraulics still allows you not to sacrifice too much comfort on the road.

The shock body is made from galvanized steel to prevent corrosion and the internal hydraulics are made by KW suspension and are the same as found in KW coilovers.

The spring plate is made of polyamide with a stainless steel core. The spring plate acts on an external thread of the shock absorber body.

Standard yellow spring. OPTIONAL springs in 17 other RAL colors are available.

Made in Germany.