Silver Project camber plates for Megane mk3 RS

Camber plates, to be fitted between the chassis front strut towers and the dampers/springs, to allow camber adjustment.

Compatible with OEM springs/dampers, with coilovers with large springs intended to be fitted with the OEM top mount.

Also compatible with coilovers with small radius springs like Ohlins R&T.

Recommended on cars with excessive front tire sidewalls wear in sporting driving.

The increase of the camber angle allows for a larger tire patch on the ground and improved grip in the corners.

Highly recommended for track use.

On Megane R RS the maximum angle is 2°10' without enlarging the strut holes. 3°+ modifying them.

CAUTION: the rose joint is subject to wear and is not covered by any warranty. The duration may bary based on the use, potholes, vibrations due to bad tarmac etc.

Spare rose joints are available for € 20 each + shipping.

Compatible with:

MEGANE III coupe included RS 250, 265, 275 (DZ0/1_)
MEGANE III hatchback (BZ0_)
MEGANE III Grandtour (KZ0/1)
MEGANE CC (EZ0/1_)
SCENIC III (JZ0/1_)
GRAND SCENIC III (JZ0/1_)